Half-life is the time required for half of a radioactive substance to decay. This guide explains the half-life formula, shows how to calculate the amount or activity remaining, and provides practical examples from radiometric dating, medicine, environmental tracing, and planetary science.
Overview
Radioactive decay is a statistical process in which unstable atomic nuclei transform into more stable forms. A single nucleus cannot be assigned an exact decay time, but a large population follows a predictable pattern. The half-life, written as T1/2, describes that pattern: after one half-life, 50% of the original material remains; after two, 25% remains; after three, 12.5% remains.
The basic radioactive decay equation is:
N = N0(1/2)t/T1/2
- N is the amount remaining after time t.
- N0 is the initial amount.
- t is the elapsed time.
- T1/2 is the half-life.
The amount may be measured in grams, atoms, moles, becquerels, or another consistent unit. The same equation works for radioactive quantity and radioactive activity because activity is proportional to the number of undecayed nuclei.
For continuous calculations, the equivalent exponential form is:
N = N0e-λt
Here, λ is the decay constant. It is related to half-life by:
λ = ln(2)/T1/2
Use the same time unit for the decay constant and elapsed time. If the half-life is measured in years, express t in years; if it is measured in days, use days.
What to track
Before calculating, identify four values: the initial quantity, the elapsed time, the half-life, and the unit being measured. Also determine whether the question asks for material remaining, activity remaining, elapsed time, or the number of half-lives.
Quick reference table
| Half-lives elapsed | Fraction remaining | Percentage remaining |
|---|---|---|
| 0 | 1 | 100% |
| 1 | 1/2 | 50% |
| 2 | 1/4 | 25% |
| 3 | 1/8 | 12.5% |
| 4 | 1/16 | 6.25% |
| 5 | 1/32 | 3.125% |
| n | (1/2)n | 100 × (1/2)n |
Some commonly used approximate half-lives are carbon-14, about 5,730 years; iodine-131, about 8 days; technetium-99m, about 6 hours; tritium, about 12.3 years; potassium-40, about 1.25 billion years; and uranium-238, about 4.47 billion years. These rounded values are suitable for instruction and estimation. Technical work should use the value and uncertainty specified by the relevant measurement or reference.
Step-by-step calculation workflow
- Write down the known values. Separate the initial amount from the measured amount remaining.
- Convert units. Convert elapsed time and half-life to the same unit before substituting them into the formula.
- Calculate the number of half-lives. Use n = t/T1/2.
- Apply the fraction remaining. Use (1/2)n, then multiply by the initial quantity.
- Check the result. More elapsed time must produce less remaining radioactive material. After one half-life, the result should be exactly half the starting amount.
- Round at the end. Match the precision of the least precise input rather than reporting unsupported digits.
Worked examples
Example 1: amount remaining. A sample begins with 80 grams and has a half-life of 10 days. How much remains after 30 days?
First calculate the number of half-lives: 30 ÷ 10 = 3. The remaining fraction is (1/2)3 = 1/8. Therefore, 80 × 1/8 = 10 grams remain.
Example 2: activity in medicine. A radioactive preparation has an initial activity of 80 megabecquerels and a physical half-life of 8 days. After 24 days, three half-lives have passed, so the activity is 80 × (1/2)3 = 10 megabecquerels, assuming no other process changes the activity. In real medical contexts, biological removal can also matter, so physical half-life and biological or effective half-life should not be confused.
Example 3: radiometric dating. Suppose a parent isotope has a half-life of 5,730 years and a sample contains 25% of its original parent isotope, under the dating method's assumptions. Twenty-five percent equals one-quarter, or two half-lives. The estimated elapsed time is therefore 2 × 5,730 = 11,460 years. A real date also depends on how the initial parent amount, daughter products, contamination, and closed-system behavior are established.
To solve for age when the remaining fraction is not a simple power of one-half, use:
t = T1/2 × log2(N0/N)
Equivalently, with the decay constant:
t = ln(N0/N)/λ
Cadence and checkpoints
For a classroom problem, one calculation and a reasonableness check are usually enough. For a laboratory, monitoring program, or recurring dataset, record the date, measured quantity, unit, isotope, half-life value used, instrument conditions if relevant, and estimated uncertainty. Keeping these details together makes later recalculation possible.
A useful checkpoint schedule follows the timescale of the half-life:
- Short half-lives: check measurements frequently enough to distinguish real decay from instrument variation.
- Long half-lives: focus on calibration, sample identity, background correction, and consistent measurement procedures rather than expecting large changes between readings.
- Dating calculations: preserve the original ratios and assumptions so that an age can be recalculated if improved measurements become available.
For radioactive activity, remember that the physical decay equation describes nuclear transformation only. A biological half-life describes how quickly an organism or body removes a substance through processes such as metabolism or excretion. These are different quantities. When both processes matter, an effective half-life may be used, but its definition and calculation should be stated clearly.
How to interpret changes
A half-life is not a countdown to zero. The quantity approaches zero asymptotically, while practical measurements may eventually fall below an instrument's detection limit. A result that is slightly different from the ideal curve does not automatically indicate an error: counting statistics, background radiation, sample preparation, calibration, and rounding can all affect measurements.
Radiometric dating also requires more than inserting a ratio into a formula. The method may assume that the sample remained a closed system, that the decay rate is known, and that the starting relationship between parent and daughter material can be estimated. Different dating systems are suited to different materials and timescales. Treat calculated ages as measurements with assumptions and uncertainty, not as dates with unlimited precision.
Do not confuse radioactive half-life with a substance's shelf life, biological half-life, or elimination half-life. Those terms describe different processes and may use different models. Likewise, a half-life does not describe how quickly radiation travels or how long a hazard remains in every environmental setting; exposure depends on the isotope, form, location, pathway, and handling conditions. Mathematical examples are not a substitute for radiation-safety procedures.
Half-life calculations are also useful in planetary science. Long-lived isotopes help researchers estimate the ages of rocks and meteorites, while radioactive decay can contribute heat inside planets and moons. For wider context, see Mars Habitability Explained, which connects planetary environments with water, energy, chemistry, and the limits of life.
When to revisit
Revisit a half-life calculation whenever an input changes or an assumption is challenged. In recurring work, a monthly or quarterly review can be appropriate, depending on the half-life and measurement schedule. Check the calculation sooner when a new instrument reading arrives, a sample is reclassified, a reference value is updated, or a dating model gains better initial-condition estimates.
Use this practical review checklist:
- Confirm the isotope and whether the quoted half-life is physical, biological, or effective.
- Confirm that all time units match.
- Record whether the measured value is quantity, concentration, count rate, or activity.
- Recalculate with full precision, then round the final result appropriately.
- Compare the new result with the previous result and explain any difference.
- Report uncertainty and important assumptions, especially for radiometric dating.
For a quick estimate, count the number of half-lives and use the reference table. For a more precise result, use the exponential equation, retain the measurement uncertainty, and document every input. That combination makes the half-life formula useful not only for a one-time homework problem, but also for repeatable science calculations across medicine, environmental tracing, nuclear science, and planetary research.